Underfloor heating

We offer a underfloor heating installation service using the following systems.

‘Tacker Panel System’ has been developed to be used in combination with floor Insulation panels to provide a secure method of securing the pipes to the insulation layer below. The Beneath Heat ‘Tacker Panel System’ is used for screeded floors.

Installation

1. Edge insulation is fitted around the perimeter of the heated room providing a barrier against heat loss and expansion.
2. Insulation panels are laid covering the complete floor area
3. 500 gauge black polythene is then laid over the complete area.
4. The tacker panel is laid to cover the complete floor area.
5. pipework is then laid in accordance with the Beneath Heat design provided. Pipe is secured to the layers below with the rail in combination with staples.
6. pipework is connected to the manifold, filled & tested in preparation for screeding.

.

The Beneath Heat ‘Staple & Rail System’ has been developed to be used in combination with floor Insulation panels to provide a secure method of securing the pipes to the insulation layer below. The Beneath Heat ‘Staple & Rail System’ is used for screeded floors.

Installation

  1. Edge insulation is fitted around the perimeter of the heated room providing a barrier against heat loss and expansion.
  2. Insulation panels are laid coving the complete floor area.
  3. 500 gauge black polythene is then laid over the complete area.
  4. Rail is then laid at 1m centres across all areas which are to be heated.
  5. pipework is then laid in accordance with the design provided. Pipe is secured to the layers below with the rail in combination with staples.
  6. pipework is connected to the manifold, filled & tested in preparation for Screeding.

15mm Slim Board System’ where screed is not an option. 15mm Slim Board System’ can be used for solid existing floors

Installation

  1. The sub floor needs to be flat and cleared of any debris.
  2. The 15mm Slim Board & Slim Board return panels need to be laid as per the design provided.
  3. pipework can then be laid into the panel in accordance with the design provided.
  4. pipework is connected to the manifold, filled & tested.
  5. Tiles can be laid directly onto the panel using a flexible adhesive.Find out more